Tuesday, April 28, 2009
Friday, April 24, 2009
Gearbox Project Part 2.
Phew, today is a very very tiring day!
anyway, woke up at 5+ to fetch my bro to his school as my mum went outstation..shitty thing is i had to drive my mum's car cuz my car was in the workshop....wtf crv sial..so tall..cannot see the edges..like wanna bang other car liao!
But anyway, got used to it pretty quickly..wtf..80km/h no rasa...120 km/h no rasa!?!?wtf sial..keep feeling like the car no power only LOL..
Anyway.. went to the workshop around 11 and hanged out until 1+ before i went to fetch my bro..so this is how my car looked at that time..
OMG~~driver seat taken out
closer view~~waaa..whole steering rack also take out !
the end product?
this!
to this!
Driving is so much more exciting and fun now.
anyway, woke up at 5+ to fetch my bro to his school as my mum went outstation..shitty thing is i had to drive my mum's car cuz my car was in the workshop....wtf crv sial..so tall..cannot see the edges..like wanna bang other car liao!
But anyway, got used to it pretty quickly..wtf..80km/h no rasa...120 km/h no rasa!?!?wtf sial..keep feeling like the car no power only LOL..
Anyway.. went to the workshop around 11 and hanged out until 1+ before i went to fetch my bro..so this is how my car looked at that time..
OMG~~driver seat taken out
closer view~~waaa..whole steering rack also take out !
the end product?
this!
to this!
Driving is so much more exciting and fun now.
Thursday, April 23, 2009
G/Box Project Part 1
Brought the car to the workshop at 9am sharp, luckily i wasn't late by even a minute!2 more cars came after that ._."
I'll update the pictures tomorrow la..sien..
Update :
Auto gearbox..
Few hours later...this arrived!
freshly chopped LOL..
well the clutch set that came with it has already worn out so i decided to change it..aiyak..no picture pula..but it looks like this ..
jing jing jing..
jeng jeng jeng!stay tuned for more !
I'll update the pictures tomorrow la..sien..
Update :
Auto gearbox..
Few hours later...this arrived!
freshly chopped LOL..
well the clutch set that came with it has already worn out so i decided to change it..aiyak..no picture pula..but it looks like this ..
jing jing jing..
jeng jeng jeng!stay tuned for more !
Wednesday, April 22, 2009
Big day tomorrow.
Tomorrow will be the day.
Yes, the decision is made and action will be taken tomorrow.
Project gearbox conversion ; )
stay tuned.
I'm officially a spoilt brat.
Yes, the decision is made and action will be taken tomorrow.
Project gearbox conversion ; )
stay tuned.
I'm officially a spoilt brat.
Sunday, April 19, 2009
Lucky day.
Drove Khang Aik's manual wira today..damn exciting..
Can't wait to have my gearbox changed..currently still waiting for the other party to reply...
What to do, found someone to swap the gearbox but have to wait.. still better than sourcing from halfcut shop..
ARGH!I can't wait anymore!Gotta have a manual ASAP LA DEH!
Anyway , khang aik ar.. kesian ur wira... chiong with it ma.. ngek ngek ngek
Can't wait to have my gearbox changed..currently still waiting for the other party to reply...
What to do, found someone to swap the gearbox but have to wait.. still better than sourcing from halfcut shop..
ARGH!I can't wait anymore!Gotta have a manual ASAP LA DEH!
Anyway , khang aik ar.. kesian ur wira... chiong with it ma.. ngek ngek ngek
Tuesday, April 14, 2009
Application Approved.
At last, my application to TARC has been approved.
But i'm offered my 2nd choice.
wtf.
But i'm offered my 2nd choice.
wtf.
Monday, April 13, 2009
Friday, April 10, 2009
soon to come!!
Soon to come!
"Project gearbox conversion!"
Gonna swap my auto gearbox to a manual ; )
Stay tuned.
"Project gearbox conversion!"
Gonna swap my auto gearbox to a manual ; )
Stay tuned.
Sunday, April 5, 2009
I want to emo, can?
I want to emo, can?
who teh fark created the word emo anyway..
ahhh must be cheerful!wahahhahahahah
who teh fark created the word emo anyway..
ahhh must be cheerful!wahahhahahahah
Friday, April 3, 2009
Happy birthday to feh fan.
Happy 18th birthday to feh fan..
sorry bro..tarak present 4 u.. my wallet empty kaw kaw edi...
hahahha...
sorry bro..tarak present 4 u.. my wallet empty kaw kaw edi...
hahahha...
Finally, my car is safe.
Went to search around the spareparts shop and got myself....
jeng jeng jeng..!what do u think this is??
this is this lor..the one that u guys always cannot plug in..andd..laugh at...and..complain =(
so i tried to take the old one out..then only i notice that i didn't have the correct wrench..
oh well..then sent it to the workshop to help me pasang..hahahah...
now my car is safer to be in already!
well, one of the rear seatbelt buckle wasn't working also.. so i took the clip frm the old front buckle which is still in good shape and pasang at the rear... and there u have it!
all 5 seatbelts are working now~
wahhaha...so no more complaining and laughing ok!!!!
jeng jeng jeng..!what do u think this is??
this is this lor..the one that u guys always cannot plug in..andd..laugh at...and..complain =(
so i tried to take the old one out..then only i notice that i didn't have the correct wrench..
oh well..then sent it to the workshop to help me pasang..hahahah...
now my car is safer to be in already!
well, one of the rear seatbelt buckle wasn't working also.. so i took the clip frm the old front buckle which is still in good shape and pasang at the rear... and there u have it!
all 5 seatbelts are working now~
wahhaha...so no more complaining and laughing ok!!!!
Thursday, April 2, 2009
Leaks..leaks...leaks..
This is turning into a picture blog. lawl..
so here goes..went to visit kok guan to get my bonnet rubber and the driver's door belt..
new boot rubber..
door belt..old one got lose as all the clips snapped.. the previous owner didnt install it properly..
new door belt installed..CORRECTLY.
then went to get my car to do wheel balancing and alignment..
wheels taken out for balancing..
alignment~
also bought a new set of nuts to replace the rusty old ones..
Then i headed home to start my DIY leaking boot projecto!!
took off the old rubber...turns out that theres alot of rust.. and it was damn dirty..so i cleaned it a lil...
adjusting the panels..
washing the boot area..damn alot of dirt..
but it turned out to be a failure anyway.. frm what i can see the rust hole at the boot caused the water to go in..time to diy it again..but not today..
anyway.. i only got to know about it after squeezing myself in the boot and asking my brother n kakak to close the boot and splash water..
wah so dark..mane ni??
Inside the boot lor..
having trouble getting out...fat edy la..
the dumbass who just closed himself in the car booot...
hahahah
anyway, today spent today : RM28+RM28+RM50+RM24+RM18 = RM148
opss forgot another RM12.10..bought some items needed for the diy boot project! and also to duplicate my car key.. the hardware shop just had the machine so i could'nt resist LOL..
TADA!!
so here goes..went to visit kok guan to get my bonnet rubber and the driver's door belt..
new boot rubber..
door belt..old one got lose as all the clips snapped.. the previous owner didnt install it properly..
new door belt installed..CORRECTLY.
then went to get my car to do wheel balancing and alignment..
wheels taken out for balancing..
alignment~
also bought a new set of nuts to replace the rusty old ones..
Then i headed home to start my DIY leaking boot projecto!!
took off the old rubber...turns out that theres alot of rust.. and it was damn dirty..so i cleaned it a lil...
adjusting the panels..
washing the boot area..damn alot of dirt..
but it turned out to be a failure anyway.. frm what i can see the rust hole at the boot caused the water to go in..time to diy it again..but not today..
anyway.. i only got to know about it after squeezing myself in the boot and asking my brother n kakak to close the boot and splash water..
wah so dark..mane ni??
Inside the boot lor..
having trouble getting out...fat edy la..
the dumbass who just closed himself in the car booot...
hahahah
anyway, today spent today : RM28+RM28+RM50+RM24+RM18 = RM148
opss forgot another RM12.10..bought some items needed for the diy boot project! and also to duplicate my car key.. the hardware shop just had the machine so i could'nt resist LOL..
TADA!!
Wednesday, April 1, 2009
JENG JENG JENG UPDATE!
UPDATE!
I noticed that my handbrake didnt really work the way it should.. so i decided to tighten it this morning and also clean the car abit..
Jeng jeng...bringing in the cleaner...
suck suck suck~dun think the other way lol
then tighten my handbrake..
and put the cover back..
and then i tried to fix my rear seatbelt..but tak jadi..nvm lah..car below 1994 no need mah...LOL...
well, after that my handbrake still tak makan..
so i went back to the shop...the tauke ask the indian guy to adjust the handbrake..*yea rite i also know la tighten screw..thats why oni i went back*
then he just pulled the handbrake lever HIGHER to make it makan..WTF I HAD ADJUSTED IT TO BECOME 1 CLICK...KNN la..
okay forget that...its ok....i can live with it.. then i asked the guy.. my wiper..INTerval mode cannot work..relay problem right?and the fucking indian guy say..
"nola..ur wiring thing problem..not relay..if relay then other mode also cannot work edy..need to change the internal stuff.. expensive.."
ASK HIM KISS MY ARSE LA.. i was very sure its the relay thats causing the problem..
so i drove to another workshop..near my house..and i was suprised.. theres such a good workshop nearby my house..and i fcking went far far...lawll..
well, the workshop was damn good.. confirmed is the relay problem.. cost rm43 for a new one... then i said my wiper link and wiper also aging edy..until the link dislocated..so change everything..
Took relay out..
this is what happens when ur relay rosak...interval mode cannot use..damn..
the old wiper link jammed..the nut rusted and its holding on like elephant glue LOL..
so must resort to this..
jeng jeng jeng!!
finally..the stubborn old wiper link is out..~
new wiper link...
after installing the link...closing back the cover..
got myself a new set of wipers..
the old wiper screw was so stubborn that it needed to be clamed to be taken out..
blame who?the rust loh!
jeng jeng jeng...
old wiper...
new wiper!
cannot view the details clearly?tab it out huhuhu...
dun say i waste money laaa...recently alot of~
this mah....hahahaha
Total spent today : RM153 !
Edit: forgot to mentino that the guy also helped me install my grounding cable properly!
I noticed that my handbrake didnt really work the way it should.. so i decided to tighten it this morning and also clean the car abit..
Jeng jeng...bringing in the cleaner...
suck suck suck~dun think the other way lol
then tighten my handbrake..
and put the cover back..
and then i tried to fix my rear seatbelt..but tak jadi..nvm lah..car below 1994 no need mah...LOL...
well, after that my handbrake still tak makan..
so i went back to the shop...the tauke ask the indian guy to adjust the handbrake..*yea rite i also know la tighten screw..thats why oni i went back*
then he just pulled the handbrake lever HIGHER to make it makan..WTF I HAD ADJUSTED IT TO BECOME 1 CLICK...KNN la..
okay forget that...its ok....i can live with it.. then i asked the guy.. my wiper..INTerval mode cannot work..relay problem right?and the fucking indian guy say..
"nola..ur wiring thing problem..not relay..if relay then other mode also cannot work edy..need to change the internal stuff.. expensive.."
ASK HIM KISS MY ARSE LA.. i was very sure its the relay thats causing the problem..
so i drove to another workshop..near my house..and i was suprised.. theres such a good workshop nearby my house..and i fcking went far far...lawll..
well, the workshop was damn good.. confirmed is the relay problem.. cost rm43 for a new one... then i said my wiper link and wiper also aging edy..until the link dislocated..so change everything..
Took relay out..
this is what happens when ur relay rosak...interval mode cannot use..damn..
the old wiper link jammed..the nut rusted and its holding on like elephant glue LOL..
so must resort to this..
jeng jeng jeng!!
finally..the stubborn old wiper link is out..~
new wiper link...
after installing the link...closing back the cover..
got myself a new set of wipers..
the old wiper screw was so stubborn that it needed to be clamed to be taken out..
blame who?the rust loh!
jeng jeng jeng...
old wiper...
new wiper!
cannot view the details clearly?tab it out huhuhu...
dun say i waste money laaa...recently alot of~
this mah....hahahaha
Total spent today : RM153 !
Edit: forgot to mentino that the guy also helped me install my grounding cable properly!
Subscribe to:
Posts (Atom)